|
|
Design of the Air conditioning unit for additive robotic fabrication
Mandáková, Adéla ; Chorý, Tomáš (referee) ; Škaroupka, David (advisor)
The design of air conditioning unit is based on combination of the product itself and related architecture. The large-scale 3D printing is becoming more and more popular, that is why this thesis chose additive manufacturing robotic technology for designing the air conditioner. According to analysis the air distribution through perforations is the most convenient one for an indoor unit. An outdoor unit tends to be hidden because of inhomogeneity with the building. To obtain more variant studies for the design a generative process was applied. This method was applied also later on, because additive manufacturing is able to easily change dimension parameters and thus fulfil individual customer requests. Other advantages of robotic printing are the lattice structures that enable perforation manufacturing without waste and the possibility of using generative design methods.
|
|
|
Jaroslavice – place in the landscape
Šmejkal, Jiří ; Galeová, Nicol (referee) ; Ponešová, Barbora (advisor)
The theme of this diploma thesis is the architectural study of the complex of the Farm of 3D Printers in Jaroslavice. The technology of 3D printing at its speed of development has far outweighed the response to its needs. It lacks a new systematically planned building typology corresponding to the requirements of farms. Farms adapt to the spaces. The main aim of the work is to introduce the possibility of turning the situation and adapting the premises to the farms. The thesis follows the urban design of the restructuring of the Jaroslavice landscape elaborated in the previous semester. The project respects established principles at microregion level in the form of emphasis on self-sufficiency, population integrity or the use of current technologies. The land is located on the southern part of Jaroslavice. There are 3 agricultural buildings located on the property, which until 2010, when a photovoltaic power plant was built, operated in conjunction with a neighboring agricultural court. After the power plant was built, the bonds were irreversibly broken. Buildings are in a very poor condition and mutual cooperation no longer works. The existing solution replaces and shows the possibility of using solar energy in a different way. Thus, the construction cartridge works with a hybrid typology where the 3D production area is combined with the maximum solar gains of the photovoltaic panels. Generative methods have been used to design dominantly either for finding a form in terms of achieving maximum solar gains or after verifying the efficiency of the structure. The proposal has several scenarios of possible development. There are four different stages of growth and the linkage of production areas. Printers are able to replicate themselves at such a rate that they can expect rapid growth. The proposal uses controlled growth methods to simulate complex development under the conditions of maximum solar radiation. Visual distraction and overheating are also solved by atypical sunsets on the exterior façade. Thin-film photovoltaic panels are used on the sun, so it is able to produce electricity besides the shield. The energy-efficient shape along with the great advantage of the layout solution, instead of the corridor disposition, is a basic cell on the central plan view. This makes it possible to control and operate more of the machines more efficiently. The production site forwards counts full robot automation.
|
|
|
Design of the Air conditioning unit for additive robotic fabrication
Mandáková, Adéla ; Chorý, Tomáš (referee) ; Škaroupka, David (advisor)
The design of air conditioning unit is based on combination of the product itself and related architecture. The large-scale 3D printing is becoming more and more popular, that is why this thesis chose additive manufacturing robotic technology for designing the air conditioner. According to analysis the air distribution through perforations is the most convenient one for an indoor unit. An outdoor unit tends to be hidden because of inhomogeneity with the building. To obtain more variant studies for the design a generative process was applied. This method was applied also later on, because additive manufacturing is able to easily change dimension parameters and thus fulfil individual customer requests. Other advantages of robotic printing are the lattice structures that enable perforation manufacturing without waste and the possibility of using generative design methods.
|
|
|
Jaroslavice – place in the landscape
Šmejkal, Jiří ; Galeová, Nicol (referee) ; Ponešová, Barbora (advisor)
The theme of this diploma thesis is the architectural study of the complex of the Farm of 3D Printers in Jaroslavice. The technology of 3D printing at its speed of development has far outweighed the response to its needs. It lacks a new systematically planned building typology corresponding to the requirements of farms. Farms adapt to the spaces. The main aim of the work is to introduce the possibility of turning the situation and adapting the premises to the farms. The thesis follows the urban design of the restructuring of the Jaroslavice landscape elaborated in the previous semester. The project respects established principles at microregion level in the form of emphasis on self-sufficiency, population integrity or the use of current technologies. The land is located on the southern part of Jaroslavice. There are 3 agricultural buildings located on the property, which until 2010, when a photovoltaic power plant was built, operated in conjunction with a neighboring agricultural court. After the power plant was built, the bonds were irreversibly broken. Buildings are in a very poor condition and mutual cooperation no longer works. The existing solution replaces and shows the possibility of using solar energy in a different way. Thus, the construction cartridge works with a hybrid typology where the 3D production area is combined with the maximum solar gains of the photovoltaic panels. Generative methods have been used to design dominantly either for finding a form in terms of achieving maximum solar gains or after verifying the efficiency of the structure. The proposal has several scenarios of possible development. There are four different stages of growth and the linkage of production areas. Printers are able to replicate themselves at such a rate that they can expect rapid growth. The proposal uses controlled growth methods to simulate complex development under the conditions of maximum solar radiation. Visual distraction and overheating are also solved by atypical sunsets on the exterior façade. Thin-film photovoltaic panels are used on the sun, so it is able to produce electricity besides the shield. The energy-efficient shape along with the great advantage of the layout solution, instead of the corridor disposition, is a basic cell on the central plan view. This makes it possible to control and operate more of the machines more efficiently. The production site forwards counts full robot automation.
|
|
|
Design of the parametric orthosis for upper limb
Kosová, Barbora ; Jelenčík, Branislav (referee) ; Škaroupka, David (advisor)
This thesis deals with the design and manufacturing of custom-made immobilization orthosis for the upper limb. Emphasis is put on the digitization of the approach and integration of additive manufacturing in the workflow of splint production. The solution proposes automatic model construction based on a 3D scan. Such a model is further parametrized in order to provide splinting practitioners with customization abilities. Particular attention is paid to the changes of limb volume due to swell, where the use of auxetic structures is suggested.
|
guest ::
